Fuji-Imvac Engines BT-24 Marine

BT-24 Marine

Fuji-Imvac power hits the water!

Getting a fast start at the lake shouldn't require pain or muscle strain. That's why the BT-24 marine includes the all-new V-start recoil starter. Its low-resistance design transforms starting from a series of short, abrupt jerks into a long, smooth pull. It's not only easier on the arm—it's more likely to produce a start after fewer pulls, as well.

Of course, the V-start doesn't improve starting all by itself—solid-state CDI ignition and revolutionary ATM (Automatic Timing Module) play a big part, too. The ATM helps by keeping timing low (for backfire-free starting), but automatically advances it as you increase throttle. That guarantees you optimum power anywhere in the rpm range, from idle all the way up to wailing, wide-open throttle.

And once you're there, you have 3 hp of chop-hopping power—almost as much as some 26 cc marines—plus a Walbro® "butterfly" carb for absolute, pinpoint command of every bit of it. It's easy to set up and easy to keep set-up, too; water cooling, heat-resistant paint on the head and an insulating plate between the carb and crankcase prevent heat from affecting settings.

Designed with the output shaft and outdrive to be compatible with Zenoah engines, for a no-mod upgrade in power and performance for R/C speed boats!

Direct linkage throttle setup provides faster, more accurate response than a bellcrank system.

Dual ball bearings on both the crankshaft and conrod.

A Champion spark plug set at a 45° angle decreases overall height.

The included Walbro carb has a "butterfly" choke valve that's easier to use, as well as a fuel primer for quicker fuel delivery.

Unlike standard units, the V-start Recoil Starter stores starting energy during the first 8-12" inches of the pull stroke. That means you feel minimum resistance, but still hear the rapid pops that signal a clean start.

SPECIFICATIONS
Stock Number: FJIG0124
Displacement: 1.5 cu in (23.9 cc)
RPM range: 3,000-12,000
Output: 3 hp @ 10,000 rpm
Weight w/o muffler: 3.8 lbs (1.7kg)
Includes: Walbro butterfly carburetor, Champion RCJ8Y resistor spark plug, V-Start recoil starter
Requires: muffler, mounting rails, driveshaft